Choosing the right filter isn’t just about micron ratings. It’s about protecting uptime, extending fluid life, and preventing avoidable failures. Selecting the right hydraulic or lubrication filter can improve system reliability and prevent costly failures. This guide explains filter types, where they belong, and what to consider when choosing them.
With so many filter options available, we understand how difficult it can be to choose just the right one. Let’s take a look at some of the hydraulic and lubrication filter types and where/how they are predominantly used to help you make the best choice for your filtration needs.
This filter is located on a suction port of the pump or submerged in the reservoir and attached to the suction line leading to the pump. High-efficiency filters are usually not placed on the suction side, as high differential pressure can cause pump failure. A fine filter on a pump suction side would require the filter to be very large, which will handle the flow and have an extremely low-pressure drop.
A duplex features at least two filter housings with a transfer valve separating the housings. The flow can be routed through one housing or both, depending on the valve. When one of the filters is fully loaded, the operator switches the valve to activate the standby filter and then services the dirty filter. The duplex filter avoids the shutting down of a system during a filter change.
Filters are frequently considered as a necessary evil and are added to a system as an afterthought instead of a valuable asset. Proper filter selection and location can provide years of reliable equipment operation and save money that is commonly lost battling contamination-related failures.
Q: What is the purpose of a suction filter?
A: Suction filters protect the pump by capturing large contaminants before they enter the system. High-efficiency filters are rarely used on the suction side because excessive differential pressure can damage the pump.
Q: When should I use a pressure filter?
A: Pressure filters are installed between the pump and system components to protect critical parts. They can include bypass valves and are designed to handle full system pressure.
Q: Why are return filters important?
A: Return filters clean oil returning to the reservoir and help maintain ISO cleanliness targets. They should balance efficiency and flow to avoid restricting the system.
Q: Should the return filter be the most efficient filter in the system?
A: No. Making the return filter the most efficient can restrict flow and create backpressure. Efficiency should be balanced with system safety.
Q: How do I protect sensitive components in a hydraulic system?
A: Some components see only a small portion of system flow. You can protect them by installing a smaller fine filter in the critical flow path, while the rest of the system uses appropriately sized filters to maintain overall performance.
Q: When should I consider a duplex filter?
A: Duplex filters are used in systems that cannot be shut down for filter changes. They allow flow to continue through a standby filter while the primary filter is serviced.
Q: What is off-line filtration and why would I use it?
A: Off-line filters are self-contained systems that clean oil independently of system operation. They are ideal for high-efficiency cleanup, fluid transfers, or recovering contaminated oil.
About Donaldson Hy-Pro:
Donaldson Hy-Pro offers a wide range of hydraulic filtration solutions that can help you improve the performance of your machinery. Our filter elements are designed to combat dirt, water, and oxidation by-products, to help keep your systems running at peak performance.
If you're looking for a way to reduce filter expenses, improve oil cleanliness, and extend the life of your equipment, Donaldson Hy-Pro can help. Contact us today to learn more.