Dimensions are approximations taken from base model and will vary according to options chosen.
connections
Inlet
FCLCOD5-FCLCOD10: 1” male JIC (37° flare)
FCLCOD20: 1¼” male JIC (37° flare)
Outlet
FCLCOD5-FCLCOD10: 1” male JIC (37° flare)
FCLCOD20: 1¼” male JIC (37° flare)
Hoses
FCLCOD5-FCLCOD10: 1” x 10 ft (2.4 m)
FCLCOD20: 1¼” x 10 ft (2.4 m)
Element Configuration
Pre-filter
HP75L8-3MV
Main Filter
HP538L38-CSV
Seals
Fluorocarbon
operating temperature
Fluid Temperature
30°F to 225°F
(0°C to 105°C)
Ambient Temperature
40°F to 104°F
(4°C to 40°C)
materials of construction
Housings
Carbon steel with industrial coating
Hoses
Reinforced synthetic
Wands
Stainless steel
Electric motor
TEFC, 56-145 frame
0.5-2 hp, 1450-1750 RPM
Motor Starter
MSP (motor starter/protector) in an IP65, aluminum enclosure with short circuit and overload protection.
electric connection
Voltages 230 V ac and under, single phase: 35’ (11 m) retractable cord reel included. NEMA 5-15 plug installed on Power Option 12.
Voltages over 230 V ac: 35’ (11 m) loose cord included.
pump
Cast iron, positive displacement gear pump with internal relief. Maximum pressure on pump inlet 15 psi (1 bar). Consult factory for higher pressures.
pump bypass
Full bypass at 150 psi (10 bar)2
10 GPM pump is rated for intermittent duty only at pressures above 100 psi. Continual operation with dual clogged filters resulting in operating pressures over 100 psi will reduce pump life and/or cause premature pump failure.
Pneumatic Option Air Consumption
~40 cfm @ 80 psi3
35’ (11 m) retractable air hose included when pneumatic option selected. Replaces 35’ (11m) electric cord reel.
Air consumption values are estimated maximums and will vary with regulator setting.TEFLON® is a registered trademark of DuPont.
Media Description
Coalesce
100% synthetic fiber media
M
G8 Dualglass, our latest generation of DFE rated, high performance glass media for all hydraulic & lubrication fluids. βx[C] ≥ 1000 (βx ≥ 200)
Separator
TEFLON® coated screen (water barrier)
Fluid Compatibility
Petroleum based fuels, #2 Diesel (standard). For other fuel options contact factory.
Hazardous Environment Options
Select pneumatic powered unit (Power Option 00) or explosion proof NEC Article 501, Class 1, Division 1, Group C+D. Call for IEC, Atex or other requirements. If Explosion Proof option (X--) selected, no electrical cord or cord reel will be included.
