A mobile solution that maintains turbine lube oil by removing water and particulate contamination that can cause corrosion, fluid breakdown, abrasive wear on components, additive precipitation, reduced lubricity, and dielectric strength loss.
Ideal for turbine lube oil, boiler feed pumps, compressors and others R&O applications.
62” (158 cm)
30.5” (77 cm)
29” (74 cm)
379 lbs (172 kg)0
1” male JIC
1” male JIC
1” x 10 ft (2.4 m)
HP75L8-3MV
HP538L38-CS3MV
Fluorocarbon
80°F to 250°F
(27°C to 121°C)
40°F to 104°F
(4°C to 40°C)
Carbon steel with industrial coating
Reinforced synthetic
Stainless steel
TEFC, 56-145 frame
0.5 hp, 1450-1750 RPM
MSP (motor starter/protector) in an IP65, aluminum enclosure with short circuit and overload protection.
Voltages 230 V ac and under, single phase: 35’ (11 m) retractable cord reel included. Power Option 12 includes NEMA 5-15 plug.
Voltages over 230 V ac: 35’ (11 m) power cord included.
Cast iron, positive displacement gear pump with internal relief. Maximum pressure on pump inlet 15 psi (1 bar). Consult factory for higher pressures.
Full bypass at 150 psi (10 bar)
~40 cfm @ 80 psi2
35’ (11 m) retractable air hose included when pneumatic option selected. Replaces 35’ (11m) electric cord reel.
G8 Dualglass, our latest generation of DFE rated, high performance glass media for all hydraulic & lubrication fluids. βx[C] ≥ 1000 (βx ≥ 200)
Coalesce: 100% synthetic fiber media
Separator: TEFLON® coated screen (water barrier)
Mineral based turbine oil, call factory for synthetic. Cannot be used with AW hydraulic oils or phosphate esters. For water removal in AW hydraulic oils and phosphate esters, see VUD (page 124).
Select pneumatic powered unit (Power Option 00) or explosion proof NEC Article 501, Class 1, Division 1, Group C+D. Call for IEC, Atex or other requirements. If Power Option X selected, no electrical cord or cord reel will be included.